Description
With design elements modeled after our popular 3000 Series UHF Wireless Microphone Systems, the 3000 Series IEM features a rack-mount transmitter with front-panel controls and large OLED display, body-pack receiver with an efficient headphone amp (it also conveniently charges in the same ATH-CHG3 and ATH-CHG3N charging stations as the 3000 Series UHF body-pack transmitters), and ATH-E40 professional in-ear monitor headphones with propriety dual phase push-pull drivers. Together these elements provide clear, natural sound quality on any stage.
The 3000 Series Wireless IEM offers exceptionally wideband UHF coverage (138 MHz), available in frequency bands DF2 (470 – 608 MHz) and EG2 (580 – 714 MHz); receiver antenna diversity to ensure RF stability; and stereo or mono operation with pan/personal mix controls. Additional features include network monitoring and control via the Audio-Technica Wireless Manager software, a cue mode that allows an audio engineer to monitor several IEM channels from a single receiver, and a 3000 Link mode that enables compatibility with 3000 Series wireless microphone components.
Mixing and performing on a smaller scale shouldn’t have to mean sacrificing sound quality. Through the 3000 Series Wireless In-Ear Monitor System, Audio-Technica continues to deliver on its promise of making high-quality audio accessible to all.
Product Specifications
Overall System
- Operating Frequencies
- Band DF2: 470.125 to 607.875 MHz
- Band EG2: 580.000 to 713.850 MHz
- Minimum Frequency Step: 25 kHz
- Modulation Mode: FM
- Nominal/Peak Deviation: ±34 kHz nominal / ±45 kHz peak
- Frequency Response: 40 Hz to 14,100 Hz
- Stereo Separation: 75 dB
- Operating Range: 90 m (300') Open range environment with no interfering signals
- Dynamic Range: >90 dB, A-weighted, typical
- Total Harmonic Distortion: <0.2% (at 1 kHz, +4dBu input)
- Maximum Simultaneous Use (recommended): 9 ch per band
IEM Transmitter
- RF Output Power: High: 50 mW, Low: 10 mW (switchable) at 50 ohmsMay differ depending on the country or region in which you live.
- Input Connection: XLR-F type×2 (Pin1: GND, Pin2: Hot, Pin3: Cold)
- Maximum Input Level: XLR-F type: +24 dBu (at 0 dB sensitivity)
- Output Connection: 6.3 mm (1/4") TRS×2 (Tip: Hot, Ring: Cold, Sleeve: Ground)
- Network: 100BASE-T
- Network Port: RJ-45
- Power Supply: 100 to 240 V AC (50/60 Hz) to 12V DC 1 A (center positive) switched mode external power supply
- Antenna Output: BNC-type, 50 ohms
- Dimensions: 210 mm (8.3")×191 mm (7.5")×43.4 mm (1.7") (W×D×H)
- Weight: 1,100 g (39 oz) (without accessories)
- Included Accessories:
- AC adapter
- Rack-mount (large, small)
- Flexible UHF antenna
Receiver
- Receiving System: Antenna diversity
- Audio output cable performs as a secondary antenna to ensure stable RF performance.
- Image Rejection: >80 dB, typical
- RF Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
- Headphone Output Jack: 3.5 mm (1/8") TRS stereo mini-jack
- Headphone Output: 40 mW (at 12 ohms)
- EQ
- Low: 80 Hz / 160 Hz / 320 Hz / ±9 dB in 3 dB step
- High: 6 kHz